Typical doses of BIOBROM C-103L liquid for pulp and paper mill systems

conditions of system	Dose per dry weight of pulp and paper produced		Remarks
=	lb./ton	gr./metric ton	=
Heavily fouled	0.15-0.35	75-175	Boil out first, then dose with BIOBROM C-103L
Moderately fouled	0.35-0.50	175-250	Dose with BIOBROM C-103L on continuous or intermittent basis
Slightly fouled	0.15-0.35	75-175	Dose continuously with BIOBROM C-103L until slime is controlled, then add on an intermittent basis to maintain control

Monitoring Residual BIOBROM C-103L
Residual BIOBROM C-103 can be determined by measuring total residual oxidant with a chlorine test kit based on DPD (Diethyl phenylamine diamine). The results are expressed as ppm total residual chlorine.

BIOBROM C-103L Feeding System
BIOBROM C-103L is easily and safely introduced into the system to be treated by means of a dosing pump. The pump should be chosen according to the system dosing regime, to its size and to the concentration of active ingredients in the treated water. High density polyethylene (HDPE) and polyvylidene fluoride (PVDF) exhibit good resistance to BIOBROM C-103L at 40°C.